PFX Stand-off Brackets
Each box contains enough M6x12 thread former bolts to fix the tray.
|N.B. All brackets are 42mm stand off.|
|M6 x 12||Mushroom headed, Thread forming screws||No2 pozi||100||THREAD612|
The pre-punched holes have a pitch of 12.5mm, suffient to line up with slots in the tray. Slots generally have a pitch of 25mm.
Elongated slots also let the installer to use traditional tray bolts (not supplied) if desired.
Cable Tray packaging
Haley PFX Stand-off brackets are packed in multiples of 10 complete with thread forming screws to fit the pre-punched holes in each bracket. This allows them to be transported, stored, sold and used easily.
All packaging material is either recyclable or biodegradable. The inner boxes and outer cartons are made from cardboard, the tape and plastic bag, containing the tray bolts, are both biodegradable.
Thtead Forming Screws
Thead forming screws are a well proven method of fixing to sheet steel. It has a 14mm ⌀ mushroom head and a No.2 pozi drive recess.
Tray Bolt Installation
Use a battery drill* preferably fitted with a magnetic bit holder & No.2 pozi bit, such as the Wera Rapidaptor for quicker installation.
*There is always a possibility of stripping threads when a battery drill driver is used. To avoid this the torque setting needs to be adjusted to a suitable setting.
Features of the PFX Stand-off Brackets
Made in Britain.
Brackets made for the electrician.
- 42mm stand-off height for easier back access.
- Pre-punched fixing holes, for M6 Thread Forming screws, at 12.5mm pitch.
- Bracket also have slots thus increasing the versatility of fixing.
- Boxed in 10's for all round convenience.
- Manufactured in the United Kingdom.
Haley Products Ltd
Stoke on Trent