Ceiling Brackets Backplates
|Backplate withM10x12 X-set and washer||pre-galv||25||HBP10XB|
|Backplate withM10 stud and washer||pre-galv||25||HBP10ST|
Fixing to Timber Joists
Fixing to wooden joists is made a lot easier with our HBP backplate range.
The problem with wooden joists is the need to use woodscrews. The restricted height between the two parrallel faces makes it awkward to use a screwdriver.
With the HBP range the plate is first fixed to the wooden joist using your preferred woodscrew. The bracket is then fixed using the nut or bolt that is supplied with each backplate. You can also buy a plain backplate and use your own bolt.
Fixing to Ceilings
When fixing to ceiling a packing piece.
With the LBBPC10 will help prevent any distortion when excess tightening force is applied.
Any suitable fixing method of the installers choice can be used
Image is for illustration purposes only, and is not to scale.
LBC End Support
LBCEL02Z end support. The top flange is clamped under top studding nut and bottom flange is secured under the tray bolt nut.The LBCEL02Z adds extra support for the longer lengths of LBC brackets, if needed. When using the 450mm bracket an extra support should be used at the free end of the bracket.
Tray Fixing Kit
When working overhead the FK001 removes the need to use a screwdriver to hold the bolt securely while tightening up the nut. N.B. no tools needed to secure the tray.
Features of LBC Brackets
Made in Britain.
Brackets made for the electrician.
- Designed for side loading.
- Single rod suspension.
- Will fit over strut.
- Boxed in 10's for all round convenience.
- Manufactured in the United Kingdom.
Haley Products Ltd
Stoke on Trent